topic Re: Display Log Entries in ExtremeSwitching (EXOS/Switch Engine)

Display Log Entries

Michael_M — Thu, 27 Oct 2022 13:02:21 GMT

In my EOS switches if I SSH into them and a device plugs into the switch...I see a message that says "so and so port is active"...

In EXOS I have to manually type the "show log" command and then scroll all the way back to the top to see the same type of log entry messages.

Is there a command to display or print new log entries on the SSH window when they are written to the log similar to EOS so I can watch what is happening without having to use the "show log" command all the time?

Re: Display Log Entries

Stefan_Sleik — Fri, 28 Oct 2022 12:11:55 GMT

Use "show ports". You will see a refreshed state of the ports.

regards
stefan

Re: Display Log Entries

dpanev — Fri, 28 Oct 2022 12:14:04 GMT

If you are connected to the console you can turn on console logging permanently using this command:

enable log display

To disable this again:

disable log display

To get logging on your screen in a telnet or SSH session, you can enable this for your current session.

enable log target session

To disable

disable log target session