topic Re: STPD Edge Config on AP ports in ExtremeSwitching (EXOS/Switch Engine)

STPD Edge Config on AP ports

Robb — Sun, 06 Nov 2022 16:16:44 GMT

Are there any issues with using STPD commands to setup an edge port with edge-safeguard and bpdu-restrict on an AP port? I am setting these commands on all the room side jacks but wondered if I need to skip the APs. Thanks.

Re: STPD Edge Config on AP ports

CThompsonEXOS — Mon, 07 Nov 2022 13:36:26 GMT

They shouldn't be sending BPDUs but "show stpd s0 port <AP PORT> counters" will show if they are sending them.

Thanks,

Chris Thompson