topic Re: Port 10G X440G2 in ExtremeSwitching (EXOS/Switch Engine)

Port 10G X440G2

sapeurorca — Wed, 15 Mar 2023 15:29:05 GMT

Hello,
I made a connection with a 10G equipment and an Extreme Network X440-G2-48p-10G4 switch, but this link not work.
The modules are 10G-SR, they have been tested well on the other equipment.
On X440, I connect on port 49 that is SFP+.
I don't have a 10G license, do I need a 10G license for port 49-52?
Can we connect other equipment with ports 49-52?
Thanks

Re: Port 10G X440G2

Chris_H — Thu, 16 Mar 2023 12:24:59 GMT

Hello,

You will require a 10Gb port license to use the ports as 10Gb on an x440-G2.

This is explained in the following article: https://extremeportal.force.com/ExtrArticleDetail?an=000088815

Most likely this will also show up in the "show log" output via the CLI.

In case you don't have a 10Gb license you can use the ports at 1Gb with 1Gb SFP's

Re: Port 10G X440G2

Kosmo — Wed, 03 Jan 2024 05:05:10 GMT

Hi,

How to get the license and how to upload/install it into the switch?

Re: Port 10G X440G2

Stefan_K_ — Thu, 04 Jan 2024 10:55:59 GMT

Hi @Kosmo,

Get in contact with your reseller / distributor to purchase a license.

Regarding installation: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000083625&