Which OS type I should be selected on 5540 setting

Nobu — Thu, 15 Feb 2024 10:53:02 GMT

I would like to know which item I have to select when 5540 L3 switch setting.

EXOS: Default

EXOS: Primary 32.3..

EXOS: Secondary 32.3..

EXOS: Primary 32.3.. with default configuration

EXOS: Secondary 32.3.. with default configuration

EXOS: Rescue

Re: Which OS type I should be selected on 5540 setting

Chris_H — Thu, 15 Feb 2024 14:39:03 GMT

just use the "default" then it will select the method that has been selected by the CLI..

In future there is no need to interrupt the boot-process at this stage as the switch will auto-select the one that is selected via the CLI (use image primary/secondary).

In your case both of the partitions use the same version, so it does not matter, but when upgrading for instance you would load different images into the different partitions.

The "with default configuration" options are to load the OS image without loading your configuration file, so under normal circumstances this should be avoided.

topic Which OS type I should be selected on 5540 setting in ExtremeSwitching (EXOS/Switch Engine)

Which OS type I should be selected on 5540 setting

Re: Which OS type I should be selected on 5540 setting