Doubts to configure redistribution

extremeuser2 — Mon, 11 Mar 2024 08:33:53 GMT

Hi all,

It's my first time configuring an extreme network switch. I have a 5420f stack running EXOS. I have configured one VLAN with OSPF and the other Vlan with RIP.

Now I would like to redistribute RIP into OSPF and OSPF into RIP. All route type. I would like to redistribute too the static routes.

When I type the command "enable rip export ospf policy" I need to type a policy to determine which routes I want to export. Here's my doubt. How can I create a policy? Im not sure what a policy is in extreme switches.

¿We are talking about an ACL associated to a route map? That's the policy?

For example

ip access-list standard 50
permit 0.0.0.0 0.0.0.0

route-map REDISTRIBUTION permit 50
match ip address ACL 50
exit

enable rip export ospf policy 50

That's correct? If i'm wrong, could you explain me how to create a policy to can redistribute all routes from both routing protocols?

Thanks all ¡¡¡

topic Doubts to configure redistribution in ExtremeSwitching (EXOS/Switch Engine)

Doubts to configure redistribution