V6 routing between /64s on same switch

tim_mcintire — Fri, 14 Jun 2024 18:55:08 GMT

Our ISP has allocated a /56 subnet for us to use. The ISP IP address is slash48:6f00::1. I have configured our uplink switch port to be slash48:6f00::2 and added a default GW to use slash48:6f00::1. with this configuration, I can ping 2600:: I then added a second /64 and assigned it to the Internal LAN. slash48:6f01::1. When I try to ping 2600:: using slash48:6f01::1 as the source address, it fails. I have ipv6 forwarding enable on both vlans. Is there something obvious that I am missing?

Thanks,

Tim

topic V6 routing between /64s on same switch in ExtremeSwitching (EXOS/Switch Engine)

V6 routing between /64s on same switch