XIQ Firmware update say : ERROR ... But the switch have received correctly the image : XIQ BUG ?

EqosSphere-NG — Wed, 12 Mar 2025 14:03:26 GMT

From the SWITCH X440G2 / X460G2 in stack :

03/12/2025 14:48:59.69 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Send change partition request to EPM peer(s)
03/12/2025 14:48:59.49 <Noti:EPM.install_status> Slot-2: User XMCadm: Image installation finished with status success.
03/12/2025 14:48:59.13 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Installation time may be greater than expected due to a lack of memory resources

03/12/2025 14:45:27.63 <Noti:EPM.Upgrade.Strt> Slot-2: User XMCadm: Image upgrade has started.
03/12/2025 14:45:15.03 <Warn:EPM.Upgrade.State> Slot-1: Upgrade status Installation time may be greater than expected due to a lack of memory resources

03/12/2025 14:40:50.31 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Sent install request to EPM peer(s).
03/12/2025 14:40:49.68 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Send change partition request to EPM peer(s)
03/12/2025 14:40:26.65 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Sent download request to EPM peer(s).
03/12/2025 14:40:26.65 <Noti:EPM.DnldStatus> Slot-2: User XMCadm: Download of image finished with status success; Image integrity check passed.
03/12/2025 13:13:37.88 <Noti:EPM.Upgrade.DnldImg> Slot-2: User XMCadm: Download image from hostname ip address 10.X.X.X file name firmware/images/summitX-33.2.1.12.xos VR VR-Default

BUT XIQ said :

But the event log is OK ...

What's wrong ?

topic XIQ Firmware update say : ERROR ... But the switch have received correctly the image : XIQ BUG ? in ExtremeSwitching (EXOS/Switch Engine)

XIQ Firmware update say : ERROR ... But the switch have received correctly the image : XIQ BUG ?