topic Re: How to configuration x460 g2 access each Vlan to Each ISP in ExtremeSwitching (EXOS/Switch Engine)

How to configuration x460 g2 access each Vlan to Each ISP

hiennt — Mon, 16 Jun 2025 06:17:54 GMT

Re: How to configuration x460 g2 access each Vlan to Each ISP

hiennt — Mon, 16 Jun 2025 06:22:31 GMT

Hi There,

I have CORE x460 g2 and 3 vlan vlan 2 , vlan 3 ,vlan 4 now i would like vlan 1 go internet with router 1 and vlan 2 go to internet with router 2 , vlan 3 go internet with router 3 . sumarize each vlan on X460 G2 connect to each router by cable . any one can help for this highly appreciate Thanks,

Hien.

Re: How to configuration x460 g2 access each Vlan to Each ISP

Phil_ — Mon, 16 Jun 2025 07:11:13 GMT

Simply add one untagged port to each VLAN and cable the ports to the routers.

Re: How to configuration x460 g2 access each Vlan to Each ISP

Gabriel_G — Wed, 02 Jul 2025 13:49:43 GMT

Hi Hein,

If your x460-G2 is doing layer 2 operations only, you just need to extended these VLANs on the relevant ports between clients and the router for each network.

If your x460-G2 itself is the router for these networks, you would need to do either:

1) Use a single VR, VR-Default, AND something like a flow-redirect for policy based routing:

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000083175

2) Create and use multiple VRs to have separated routing tables.

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000125219