topic Telnet connection from core switch sub-switch in ExtremeSwitching (EXOS/Switch Engine)

Telnet connection from core switch sub-switch

Ghost108 — Sat, 21 Oct 2017 19:53:00 GMT

Hello 🙂

I have a extreme core switch (A) where an lwl cable is connected to another switch (B) (uplink port)

The switch (B) has no ip address yet. I can only access the switch if I connect directly with a notebook via the management port.

I can access the switch (A) via telnet 192.168.100.1
Is it possible that I can access switch (B) from switch (A) via telnet?
If yes, how can I do this?

RE: Telnet connection from core switch sub-switch

Ronald_Dvorak — Sat, 21 Oct 2017 20:05:00 GMT

The switch needs an IP for the telnet connection.

# configure vlan XXX ipaddress x.x.x.x x.x.x.x

RE: Telnet connection from core switch sub-switch

Nick_Yakimenko — Sat, 21 Oct 2017 22:40:00 GMT

You may create temporary vlan on core switch and connect untagged port of that vlan to mgmt port on switch (B)