topic RE: How to config dhcpv6 relay on summit-x440 in ExtremeSwitching (EXOS/Switch Engine)

How to config dhcpv6 relay on summit-x440

Joy_Liu — Mon, 27 Apr 2015 21:19:00 GMT

Hello All,

I would like to know how to add dhcpv6 relay on summit-x440 switch?
Anyone has experiences for it?

Thanks.

Regards,
Joy

RE: How to config dhcpv6 relay on summit-x440

Hernandez__Josh — Mon, 27 Apr 2015 21:31:00 GMT

Joy,

You can use the following command:

configure bootprelay ipv6 add

RE: How to config dhcpv6 relay on summit-x440

Sumit_Tokle — Mon, 27 Apr 2015 22:45:00 GMT

It doesn't supported in older version for sure.

RE: How to config dhcpv6 relay on summit-x440

Kawawa — Tue, 28 Apr 2015 16:24:00 GMT

As outlined above by Hernandez, the command is:
configure bootprelay ipv6 add The X440 should come with 15.x installed, with support for IPv6 already. All the best

RE: How to config dhcpv6 relay on summit-x440

Joy_Liu — Tue, 28 Apr 2015 16:46:00 GMT

Hello All,

Thanks for all replies, and I found that it's a new cli command since 15.4.1.

Regards,

Joy