Stacking cable support for X440-G2 (correction to documentation)

Larry_Kunz — Mon, 15 Aug 2016 23:55:00 GMT

In the Summit Hardware Installation Guide for EXOS 21, the "Stacking Cables" table is incorrect with respect to stacking-cable support on the X440-G2 switch.
http://documentation.extremenetworks.com/summit/Summit_Family_HW_Install/Stacking/r_stacking-cables....

At the bottom of the table, the stated limitation -- 10G stacking ports on ExtremeSwitching X440-G2 (48-port switches only), Summit X450-G2 10G, and ExtremeSwitching X620 switches -- should apply only to the 10 meter cable (model no. 10307). The shorter cable lengths (model nos. 10304, 10305, and 10306) are supported for all models of the X440-G2 as well as for the X450-G2 (10G models) and the X620.

I'll be sure to correct the table in the next update to the document.

Larry Kunz
Information Development
Extreme Networks

RE: Stacking cable support for X440-G2 (correction to documentation)

StephenW — Fri, 19 Aug 2016 17:32:00 GMT

I informed our team about this issue.

RE: Stacking cable support for X440-G2 (correction to documentation)

Angel_Emilio_Go — Thu, 23 Nov 2017 23:59:00 GMT

Hello All,

what is the reason for this limitation?

Thanks and regards
Ángel

topic RE: Stacking cable support for X440-G2 (correction to documentation) in ExtremeSwitching (EXOS/Switch Engine)

Stacking cable support for X440-G2 (correction to documentation)

RE: Stacking cable support for X440-G2 (correction to documentation)

RE: Stacking cable support for X440-G2 (correction to documentation)