topic RE: guest authentication with external captive portal on wired network in ExtremeSwitching (EXOS/Switch Engine)

guest authentication with external captive portal on wired network

santhosh_kumar — Tue, 19 Aug 2014 11:42:00 GMT

i have extreme switches which are enabled with dot1x in those switches i would like to enable external capative portal authentication for guest users could you please help in the configuration for this setup

RE: guest authentication with external captive portal on wired network

Azharudeen_VM — Fri, 20 Feb 2015 18:35:00 GMT

can u any one help how to configure captive portal configuration wired and wireless via NAC manager

venkatachalam.P

RE: guest authentication with external captive portal on wired network

Tim_DeNike — Fri, 20 Feb 2015 23:27:00 GMT

www.packetfence.org

RE: guest authentication with external captive portal on wired network

Sumit_Tokle — Tue, 24 Feb 2015 10:19:00 GMT

Following was my config partial infomation (for netlogin)

create vlan "Temp"
configure vlan Temp tag 1164
configure vlan Temp ipaddress 192.168.100.1 255.255.255.0

configure radius netlogin primary server x.x.x.x 1645 client-ip x.x.x.y vr VR-Default
configure radius netlogin primary shared-secret encrypted x.x.x.x
enable radius netlogin

configure netlogin vlan Temp
enable netlogin web-based
configure netlogin web-based authentication database-order radius
enable netlogin ports 13-18 web-based
configure netlogin base-url "sutokle.cisco.com"
configure netlogin redirect-page "http://sumittokle.extremenetworks.com"

configure dns-client add name-server x.x.x.x vr VR-Default
configure dns-client add name-server x.x.x.x vr VR-Default
configure dns-client add domain-suffix x.x.x.

enable sntp-client
configure vlan Temp dhcp-address-range 192.168.100.10 - 192.168.100.50
configure vlan Temp dhcp-options default-gateway 192.168.100.1

enable web http