topic RE: Trouble Creating port mirror on Extreme Summit x440 Switch in ExtremeSwitching (EXOS/Switch Engine)

Trouble Creating port mirror on Extreme Summit x440 Switch

Desmond_Gonzale — Thu, 17 Dec 2015 04:34:00 GMT

I'm having trouble with the CLI on my switch. When I try to configure my port mirror I receive the error invalid slot number detected at marker. I know the port I need to mirror is on slot1 of the stack but anyway I input the slot number it gives me the same error. Any help is greatly appreciated. Thank you.

Desmond

Command I'm trying: configure mirror DES add port 25 slot-1 ingress-and-egress

RE: Trouble Creating port mirror on Extreme Summit x440 Switch

davidj_cogliane — Thu, 17 Dec 2015 04:39:00 GMT

configure mirror add port 1:24??

RE: Trouble Creating port mirror on Extreme Summit x440 Switch

Desmond_Gonzale — Thu, 17 Dec 2015 04:50:00 GMT

Hello, I'll give it a try. Does 1 represent destination or port to be mirrored?

RE: Trouble Creating port mirror on Extreme Summit x440 Switch

Patrick_Voss — Thu, 17 Dec 2015 04:52:00 GMT

As David mentioned you want to use the command below:

configure mirror DES add port 1:25 ingress-and-egress

The slot number goes in before the colon of each individual port when stacking is used.

RE: Trouble Creating port mirror on Extreme Summit x440 Switch

Desmond_Gonzale — Thu, 17 Dec 2015 05:40:00 GMT

Thanks David. That did the trick. I really appreciate the assistance!