topic EXOS and NetSight: Could not get MAC and IP information in NetSight via PortTools/Port Monitor in ExtremeSwitching (EXOS/Switch Engine) https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-and-netsight-could-not-get-mac-and-ip-information-in/m-p/26943#M3746 We did not get any IP nor MAC information from connected devices at the ports of our new X440 switches via Netsight/Port Tools/Port Monitor. In the fields "Bridge Filtering Database" and "Node/Alias", where we can find the MAC and IP addresses of a connected device at our EOS switches. But all the EXOS switches say there: "No data found".<BR /> <BR /> We would be very glad to get any recommendation to solve this problem. Thanks.<BR /> <BR /> Switch X440-G2-48p-10GE4<BR /> ExtremeXOS version 22.1.1.5<BR /> Netsight Console v7.0.8.34<BR /> <BR /> Wed, 21 Dec 2016 21:17:00 GMT Lutz_DD 2016-12-21T21:17:00Z EXOS and NetSight: Could not get MAC and IP information in NetSight via PortTools/Port Monitor https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-and-netsight-could-not-get-mac-and-ip-information-in/m-p/26943#M3746 We did not get any IP nor MAC information from connected devices at the ports of our new X440 switches via Netsight/Port Tools/Port Monitor. In the fields "Bridge Filtering Database" and "Node/Alias", where we can find the MAC and IP addresses of a connected device at our EOS switches. But all the EXOS switches say there: "No data found".<BR /> <BR /> We would be very glad to get any recommendation to solve this problem. Thanks.<BR /> <BR /> Switch X440-G2-48p-10GE4<BR /> ExtremeXOS version 22.1.1.5<BR /> Netsight Console v7.0.8.34<BR /> <BR /> Wed, 21 Dec 2016 21:17:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-and-netsight-could-not-get-mac-and-ip-information-in/m-p/26943#M3746 Lutz_DD 2016-12-21T21:17:00Z RE: EXOS and NetSight: Could not get MAC and IP information in NetSight via PortTools/Port Monitor https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-and-netsight-could-not-get-mac-and-ip-information-in/m-p/26944#M3747 Hi Lutz, As far as i can see this information is populated using the OID's dot1dTpFdbEntry=1.3.6.1.2.1.17.4.3.1 , if i do a manual polling it if fetching the MAC address information but not when doing the port tools. I would suggest to open up a GTAC case to investigate this further. Tue, 27 Dec 2016 12:38:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-and-netsight-could-not-get-mac-and-ip-information-in/m-p/26944#M3747 Karthik_Mohando 2016-12-27T12:38:00Z