topic RE: inter vlan issue in ExtremeSwitching (EXOS/Switch Engine)

inter vlan issue

Ranjith — Wed, 08 Aug 2018 16:02:00 GMT

i have 2 networks,these networks are in different core switch,i created different vlans in both switch,now inter vlan is not working what is the solutions

RE: inter vlan issue

Naresh — Wed, 08 Aug 2018 16:07:00 GMT

Hi Ranjith,

If core switch is Extreme device, make sure ipforwarding is enabled on both the VLANS.

RE: inter vlan issue

Lexus92008 — Wed, 08 Aug 2018 16:08:00 GMT

Hi Ranjith!
It seems to be "enable ipforwarding" and "enable ipforwarding vlan " is your solution.
Don't forget to place an ip address on both vlans. They mast be from different subnets.

RE: inter vlan issue

Mrxlazuardin — Wed, 08 Aug 2018 16:12:00 GMT

Hi Ranjith, Don't forget to route between core switches and make static routings for each vlan, or you can use dynamic routing protocol for advertising each vlan network. Best regards,

RE: inter vlan issue

Ranjith — Wed, 08 Aug 2018 16:17:00 GMT

ip forwarding is enabled.route is not configured.can you please explain the route configuration

RE: inter vlan issue

Mrxlazuardin — Wed, 08 Aug 2018 16:17:00 GMT

Hi Ranjith, This URL might be helpful. https://gtacknowledge.extremenetworks.com/pkb_mobile#/articles/en_US/How_To/Getting-started-with-OSPF-on-EXOS Best regards,

RE: inter vlan issue

Lexus92008 — Wed, 08 Aug 2018 17:41:00 GMT

Where links between core switches. What configuration they have?