https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bgp-fail-to-bind-with-pol-file/m-p/27476#M3974 Looked at this a bit more and teh top comment should have a # before it , as it is a note <BR /> <BR /> #SDC1 BGP Policy "BGP_EXPORT_FROM_OSPF"<BR /> <BR /> entry bgp-export-permit {<BR /> if match any {<BR /> nlri 1xx.2xx.133.0/24 ;<BR /> }<BR /> then {<BR /> Thu, 09 Mar 2017 18:11:00 GMT Rod_Robertson2 2017-03-09T18:11:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bgp-fail-to-bind-with-pol-file/m-p/27475#M3973 Bind failure when trying to add policy to bgp<BR /> <BR /> Slot-1 SDC_EXT1.21 # en bgp export ospf-extern2 address-family ipv4-unicast export-policy BGP_EXPORT_FROM_OSPF<BR /> Error: Failed to bind to export policy BGP_EXPORT_FROM_OSPF<BR /> <BR /> Slot-1 SDC_EXT1.22 # vi BGP_EXPORT_FROM_OSPF.pol<BR /> <BR /> SDC1 BGP Policy "BGP_EXPORT_FROM_OSPF"<BR /> <BR /> entry bgp-export-permit {<BR /> if match any {<BR /> nlri 1xx.2xx.133.0/24 ;<BR /> }<BR /> then {<BR /> origin igp ;<BR /> permit ;<BR /> }<BR /> }<BR /> entry bgp-export-deny {<BR /> if match all {<BR /> }<BR /> then {<BR /> deny ;<BR /> }<BR /> }<BR /> <BR /> This happens with all my BGP policies so I have something fundimentally wrong<BR /> <BR /> Thu, 09 Mar 2017 17:16:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bgp-fail-to-bind-with-pol-file/m-p/27475#M3973 Rod_Robertson2 2017-03-09T17:16:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bgp-fail-to-bind-with-pol-file/m-p/27476#M3974 Looked at this a bit more and teh top comment should have a # before it , as it is a note <BR /> <BR /> #SDC1 BGP Policy "BGP_EXPORT_FROM_OSPF"<BR /> <BR /> entry bgp-export-permit {<BR /> if match any {<BR /> nlri 1xx.2xx.133.0/24 ;<BR /> }<BR /> then {<BR /> Thu, 09 Mar 2017 18:11:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bgp-fail-to-bind-with-pol-file/m-p/27476#M3974 Rod_Robertson2 2017-03-09T18:11:00Z