topic OSPF v3 Test Procedure in ExtremeSwitching (EXOS/Switch Engine)

OSPF v3 Test Procedure

Waqas_Naeem — Sun, 20 Nov 2016 14:06:00 GMT

Is there test procedure for OSPFv3 on Summit switches?

RE: OSPF v3 Test Procedure

Edward_Tsui — Mon, 21 Nov 2016 09:56:00 GMT

Hi Waqas,

What do you mean by test procedure? Do you mean troubleshooting procedure?

RE: OSPF v3 Test Procedure

Waqas_Naeem — Mon, 21 Nov 2016 13:23:00 GMT

Basically equipment is in customs and they need to perform test procedure for OSPF v3 before approving the clearance and release

RE: OSPF v3 Test Procedure

Edward_Tsui — Mon, 21 Nov 2016 13:23:00 GMT

But what is the criteria of passing the test?

RE: OSPF v3 Test Procedure

Ron_Huygens — Mon, 21 Nov 2016 13:23:00 GMT

I still don't understand why customs has to validate OSPFv3 to give clearance.

RE: OSPF v3 Test Procedure

Henrique — Mon, 21 Nov 2016 13:23:00 GMT

Neither do I. Doesn't make sense to me.

Waqas, could you please clarify?

Thanks.

RE: OSPF v3 Test Procedure

Waqas_Naeem — Mon, 21 Nov 2016 13:23:00 GMT

This is the first time I heard this so thought to ask on community. I will try to get details and will surely share here

RE: OSPF v3 Test Procedure

Erik_Auerswald — Mon, 21 Nov 2016 14:57:00 GMT

Hi Waqas,

you might want to take a look at the documentation for OSPFv3. For testing you probably need two switches with the respective licenses, a network cable between them, and then configure basic OSPFv3 in the Default VLAN. Adding IP addresses, enabling ipforwarding, enabling OSPFv3, and adding vlan Default to OSPFv3 should suffice. You could then use the commands starting with show ospfv3 to verify operation.

Erik