topic RE: show vlan statistics not show the tx total and tx Byte X440-48p in ExtremeSwitching (EXOS/Switch Engine)

show vlan statistics not show the tx total and tx Byte X440-48p

Jarret_Murray — Tue, 12 Sep 2017 15:55:00 GMT

the show vlan statistics is not showing the TX frames or Bytes
have a X440-48p
Vlan Rx Total Rx Byte Tx Total Tx Byte
Frames Count Frames Count
================================================================================
Default 313831111 183112494472 - -
voice 125149 10530642 - -

RE: show vlan statistics not show the tx total and tx Byte X440-48p

Andrew_Imam — Tue, 12 Sep 2017 17:57:00 GMT

Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew

RE: show vlan statistics not show the tx total and tx Byte X440-48p

Jarret_Murray — Tue, 12 Sep 2017 17:57:00 GMT

Ya did try the config port all monitor vlan "voice" tx-only
no joy, O well thanks for the speedy reply

RE: show vlan statistics not show the tx total and tx Byte X440-48p

Bin — Fri, 22 Sep 2017 07:11:00 GMT

Hi, This article may help you.

Show vlan statistics don't show Tx counters
https://gtacknowledge.extremenetworks.com/articles/Q_A/Show-vlan-statistics-don-t-show-Tx-counters

Best regards