topic RE: Link aggregation (BD8810) will work with other vendor Netgear switch ? in ExtremeSwitching (EXOS/Switch Engine)

Link aggregation (BD8810) will work with other vendor Netgear switch ?

PARI_ELANSURIYA — Mon, 20 Aug 2018 09:22:00 GMT

Link aggregartion (BD8810) will work with other vendor Netgear switch ? I checked netgear it will support LAG I want the compatability whether both will work connect back to back through LAG ?

RE: Link aggregation (BD8810) will work with other vendor Netgear switch ?

Ron_Huygens — Mon, 20 Aug 2018 12:29:00 GMT

EXOS support the general implemented LACP protocol.
When the other vendor support LACP, you should be able to form a LAG between these to devices.

RE: Link aggregation (BD8810) will work with other vendor Netgear switch ?

Harkanwaljeet_S — Mon, 20 Aug 2018 15:42:00 GMT

I have deployments using port sharing between Extreme BD switches and Cisco ASR, or Juniper M seriesor Ericsson SSR. As long as Netgear supports it, there should not be any issue.

RE: Link aggregation (BD8810) will work with other vendor Netgear switch ?

Ron_Smith — Thu, 23 Aug 2018 17:54:00 GMT

We have deployments of LACP between Palo Alto & Juniper MX routers to Extreme BDX and BD8810. They work great as long as they support LACP.