topic RE: BGP passive neighbor in ExtremeSwitching (EXOS/Switch Engine)

BGP passive neighbor

Jarek — Mon, 16 Nov 2015 17:44:00 GMT

Hello Extreme Team,

do you have any plans to add a BGP passive neighbor configuration to EXOS?

--
Jarek

RE: BGP passive neighbor

Rahmathullah__S — Mon, 16 Nov 2015 17:52:00 GMT

Hi Jarek,
Use following command :

disable bgp neighbor [remoteaddr / neiigbor Ip]

Thanks,
Syed

RE: BGP passive neighbor

Jarek — Mon, 16 Nov 2015 18:15:00 GMT

Hi Syed,

this command disables a peer, I don't want to disable it.
It would be nice to have a command like:
juniper -> set protocols bgp group test passive or
cisco -> neighbor 1.1.1.1 transport connection-mode passive

--
Jarek

RE: BGP passive neighbor

Jarek — Mon, 23 Nov 2015 21:17:00 GMT

Any info about my question  ?

--
Jarek

RE: BGP passive neighbor

Rahmathullah__S — Tue, 24 Nov 2015 17:01:00 GMT

Hi Jarek,
I checked and found passive neaighbor feature is not available in EXOS till 16.1.

Do you want this to supported in later version of EXOS code, please open a case with GTAC with feature request query. (https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...)

Thanks,Syed Nishath

RE: BGP passive neighbor

Jarek — Tue, 24 Nov 2015 18:53:00 GMT

Thanks Syed,

I opened a GTAC case.

--
Jarek