topic RE: Unconfigure EAPS - Step by step in ExtremeSwitching (EXOS/Switch Engine)

Unconfigure EAPS - Step by step

Oscar_Javier_Ro — Tue, 15 Mar 2016 21:46:00 GMT

Hi everybody,

I need delete all EAPS configuration, please confirm:

disable "Eaps_name_1"

unconfigure "Eaps_name_1" primary port

unconfigure "Eaps_name_1" secondary port

delete "Eaps_name_1"

that's right??

Thanks a lot!

RE: Unconfigure EAPS - Step by step

Patrick_Voss — Tue, 15 Mar 2016 21:50:00 GMT

Hi Oscar,

I believe you can just skip to delete the EAPS name but doing it this way wont hurt anything.

RE: Unconfigure EAPS - Step by step

Oscar_Javier_Ro — Tue, 15 Mar 2016 22:06:00 GMT

it's necessary delete vlan port member?

RE: Unconfigure EAPS - Step by step

Patrick_Voss — Tue, 15 Mar 2016 22:14:00 GMT

You should be able to delete the EAPS name and it will remove all other configuration. This can be verified by attempting that command and then running "show config eaps"

RE: Unconfigure EAPS - Step by step

Oscar_Javier_Ro — Tue, 15 Mar 2016 22:40:00 GMT

Ok Patrick thanks a lot!

RE: Unconfigure EAPS - Step by step

dflouret — Wed, 16 Mar 2016 20:09:00 GMT

Oscar,

Just make sure, before deleting EAPS, that the ring is open, or you'll generate a nice loop in your network!

If you are not sure of the cabling status, disable the secondary port in the Master switch (which is what the EAPS master normally does...)