topic EXOS VM OpenFlow in ExtremeSwitching (EXOS/Switch Engine)

EXOS VM OpenFlow

Gn_Arder — Mon, 12 Nov 2018 05:21:00 GMT

Hi, I would like to use openflow on a GNS3 Lab with the EXOS VM, I have reed on GTAC that a license is needed to enable openflow on real switches. Is it the same for EXOS VM? How can i enable openflow on EXOS VM?

RE: EXOS VM OpenFlow

StephenW — Mon, 12 Nov 2018 20:42:00 GMT

Did you try to enable the trial license?

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-trial-license/

RE: EXOS VM OpenFlow

Gn_Arder — Tue, 13 Nov 2018 02:57:00 GMT

Hi Stephen, i did try to enable the trial license but the command is not available on Exos VM 22.5.1.7

* EXOS-VM.1 # debug epm ?
show Show running system information
* EXOS-VM.1 # debug epm

RE: EXOS VM OpenFlow

Karthik_Mohando — Tue, 13 Nov 2018 09:23:00 GMT

Hi,

Try to execute the complete command "debug epm enable trial-license" , the command will not be displayed even in EXOS (non-VM).

RE: EXOS VM OpenFlow

Gn_Arder — Wed, 14 Nov 2018 01:15:00 GMT

Great Karthik it worked.

thank you

RE: EXOS VM OpenFlow

Karthik_Mohando — Thu, 15 Nov 2018 13:29:00 GMT

Hi,

Thanks for getting back on this one, good to see that it helped.