topic RE: How to check connected SFP module Serial no. Part No. type and Info? in ExtremeSwitching (EXOS/Switch Engine)

How to check connected SFP module Serial no. Part No. type and Info?

Paul11 — Fri, 29 May 2015 05:04:00 GMT

How to check connected SFP module Serial no. Part No. type and Info?

Apart from these command? I tried these command but can't grab required info.

debug hal show optic-info slot 1
show ports 1:25 transceiver information detail
sh ports 2:25 information detail

Thanks.

RE: How to check connected SFP module Serial no. Part No. type and Info?

Sean_Brady — Fri, 29 May 2015 05:54:00 GMT

I am running code 15.3.1.4patch1-44 on an x670v and the output of show port transceiver info detail gives me the requested information.

sho ports transceiver information detail

Port : 1

Media Type : SF+_SR
Vendor Name : FINISAR CORP.
Part Number : FTLX8571D3BCL-EX
Serial Number : 1353P-00470
Wavelength : 850 nm

Temp (Celsius) : 26.30 Status : Normal
Low Warn Threshold : -8.00 High Warn Threshold : 73.00
Low Alarm Threshold : -13.00 High Alarm Threshold : 78.00

Voltage AUX-1/Vcc (Volts) : 3.31 Status : Normal
Low Warn Threshold : 3.00 High Warn Threshold : 3.60
Low Alarm Threshold : 2.90 High Alarm Threshold : 3.70

Tx Power (dBm) : -2.18 Status : Normal
Low Warn Threshold : -5.00 High Warn Threshold : -1.00
Low Alarm Threshold : -6.00 High Alarm Threshold : 0.00

Rx Power (dBm) : -31.55 Status : Low Alarm
Low Warn Threshold : -18.01 High Warn Threshold : -1.00
Low Alarm Threshold : -20.00 High Alarm Threshold : 0.00

Tx Bias Current (mA): 7.66 Status : Normal
Low Warn Threshold : 5.00 High Warn Threshold : 12.60
Low Alarm Threshold : 4.00 High Alarm Threshold : 13.20

Are you running an older train of code? Do you get any output from that command?

RE: How to check connected SFP module Serial no. Part No. type and Info?

dflouret — Fri, 29 May 2015 07:10:00 GMT

That command will work if the port and the transceiver support Digital Diagnostic Monitoring Interface (DDMI).

If you issue the command on a port that does not support DDMI you will get an error message like this:
Port 3:1 This command is not supported on this port. All ports and
transceiver of the ports requested in the command need to support DDMI.If you issue the command on a port that supports DDMI, but the transceiver does not support it you will get an error message like this
Port 3:1 This media/transceiver does not support enhanced digital diagnostic
monitoring interface (DDMI). All ports and transceiver of the ports requested
in the command need to support DDMI.The command is available on the following platforms:
• BlackDiamond 8800—10G8Xc, 10G4Xc modules and S-10G1Xc option cards with 10G XFP optics
• BlackDiamond 8900—10G8X-xl modules and S-10G1Xc option cards with 10G XFP optics
• Summit X250e switches—SFP ZX and LX100 optics
• Summit X450a, X450e switches—SFP ZX and LX100 optics
• Summit X460 switch—SFP ZX and LX100 optics
• Summit X480 switches and X480 VIM2-10G4X—XFP and SFP ZX and LX100 optics
• Summit X650 switches—SFP ZX and LX100 optics —SFP+ optics ER/LR
• Summit X670 switches—SFP ZX and LX100 1G optics —SFP+ 10G optics

RE: How to check connected SFP module Serial no. Part No. type and Info?

Paul11 — Fri, 29 May 2015 10:13:00 GMT

Thanks all. 

RE: How to check connected SFP module Serial no. Part No. type and Info?

SchmuFoo — Mon, 11 Jan 2016 22:56:00 GMT

Hello at all,

In this context:

Is there an SNMP OID avaible, to get the "Media Type" and/or even the Partnumber?

(f.e. Order P/N 10051H for the 1000BASE-SX SFP -

code:

 http://learn.extremenetworks.com/rs/extreme/images/1000Base-SFP-Optics-DS.pdf

)

Cheers,
Jan

RE: How to check connected SFP module Serial no. Part No. type and Info?

Drew_C — Mon, 11 Jan 2016 22:56:00 GMT

Hi Jan,
This is on the list of things we've asked for, but it hasn't been implemented in EXOS yet.

-Drew

RE: How to check connected SFP module Serial no. Part No. type and Info?

Renato_Santos1 — Mon, 11 Jan 2016 22:56:00 GMT

Drew, there are MIB to monitor the power transceiver by SNMP in the summit x450, 460 and x670? If have, what MIB's?

RE: How to check connected SFP module Serial no. Part No. type and Info?

Drew_C — Mon, 11 Jan 2016 22:56:00 GMT

Hi Renato, this feature isn't available in the MIB yet.

RE: How to check connected SFP module Serial no. Part No. type and Info?

Renato_Santos1 — Thu, 12 May 2016 20:02:00 GMT

Hi Drew!

I need to edit some cfg files. Is it possible to send me the download page for File Manager App?

Thanks!!

RE: How to check connected SFP module Serial no. Part No. type and Info?

Drew_C — Thu, 12 May 2016 20:02:00 GMT

<content-quote data-username="Renato Santos">Hi Drew!

I need to edit some cfg files. Is it possible to send me the download page for File Manager App?

Thanks!!

</content-quote>This belongs in a new discussion. Please reference the new conversation here: Editing config files

RE: How to check connected SFP module Serial no. Part No. type and Info?

Renato_Santos1 — Thu, 12 May 2016 20:02:00 GMT

Oh!! Thanks excuse me