topic RE: Slot-2 FAILED (1) Dual Master in ExtremeSwitching (EXOS/Switch Engine)

Slot-2 FAILED (1) Dual Master

Alexandr_P — Mon, 16 Feb 2015 14:18:00 GMT

Hello!

I have 2 switches X460 in stack.
Slot 1 - priority 90
Slot 2 - priority 70
Soft 15.5.2.9 p1-5

After reboot slot 1, slot 2 became Master, slot 1 role NONE and MGMT LED is blincking amber.

In log I see messages like
Failed to send SNTP request to server
and
Slot-1: Slot-2 FAILED (1) Dual Master

POST go normal (see this through console)
Diagnostic pass normal.

Any ideas?

Thank you!

RE: Slot-2 FAILED (1) Dual Master

PARTHIBAN_CHINN — Mon, 16 Feb 2015 15:47:00 GMT

It could be the known issues with x460 stacking links, Could you collect the logs and reaching to tac If there see no errors seen in. Stack links

RE: Slot-2 FAILED (1) Dual Master

Alexandr_P — Mon, 16 Feb 2015 17:57:00 GMT

What exacly there is known issue with X460 stacking links?
X460 stacking through 10G links.

RE: Slot-2 FAILED (1) Dual Master

Ian_Worms — Mon, 16 Feb 2015 23:37:00 GMT

Hi,

I had a similar issue and Extreme TAC requested that I upgrade to version summitX-15.5.3.4-patch1-5.xos. The Bug id the provided me was xos0059131. My issue was that slot 2 was failing.

I was using the 10GB ports for stacking, Alternatenative ports.

Upgrade my stack and all looks ok now.

RE: Slot-2 FAILED (1) Dual Master

Alexandr_P — Tue, 17 Feb 2015 13:42:00 GMT

Hi!

You mean this?
xos0059131 Debounce timer is not getting configured if stack ports reside indifferent units. Also, pre-emphasis configuration should be
rejected in alternate stacking mode.

Which resolved in EXOS 15.6.2?

Thank you!

RE: Slot-2 FAILED (1) Dual Master

Edson_Fuchigami — Fri, 22 May 2015 13:04:00 GMT

Follows the hint to solve the problem!

http://gtacknowledge.extremenetworks.com/articles/Solution/Native-stack-links-are-flapping-on-Summit...

RE: Slot-2 FAILED (1) Dual Master

Leandro_Brito — Fri, 22 May 2015 18:18:00 GMT

Remember to add the debounce command after Exos upgrade.

The fix in this case, is the option to run this command.