https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmpassist/m-p/17158#M508 exos version 22.3.1.4, snmp assist gives fault message at the end<BR /> Traceback (most recent call last):<BR /> File "/usr/local/cfg/snmpassist.py", line 204, in <MODULE><BR /> main()<BR /> File "/usr/local/cfg/snmpassist.py", line 119, in main<BR /> (snmpuser, authtype, authpw, privpw, privtype))<BR /> RuntimeError<BR /> <BR /></MODULE> Mon, 13 Nov 2017 16:34:00 GMT Ignace_Vyncke 2017-11-13T16:34:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmpassist/m-p/17158#M508 exos version 22.3.1.4, snmp assist gives fault message at the end<BR /> Traceback (most recent call last):<BR /> File "/usr/local/cfg/snmpassist.py", line 204, in <MODULE><BR /> main()<BR /> File "/usr/local/cfg/snmpassist.py", line 119, in main<BR /> (snmpuser, authtype, authpw, privpw, privtype))<BR /> RuntimeError<BR /> <BR /></MODULE> Mon, 13 Nov 2017 16:34:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmpassist/m-p/17158#M508 Ignace_Vyncke 2017-11-13T16:34:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmpassist/m-p/17159#M509 Looks like this is likely the same problem described in the issue on GitHub linked below:<BR /> <A href="https://github.com/extremenetworks/ExtremeScripting/issues/32" target="_blank" rel="nofollow noreferrer noopener">https://github.com/extremenetworks/ExtremeScripting/issues/32</A><BR /> <BR /> Can you get the following information:<BR /> <OL> <LI>All commands/input used to trigger this. </LI><LI>Are there any special characters in the auth or privacy passwords? </LI><LI>What is the SNMP config on the switch prior to running the snmpassist.py script?</LI></OL> Mon, 13 Nov 2017 21:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmpassist/m-p/17159#M509 BrandonC 2017-11-13T21:50:00Z