topic RE: how to enable gvrp? missing command gvrp in ExtremeSwitching (EXOS/Switch Engine)

how to enable gvrp? missing command gvrp

Gene_Fontanilla — Mon, 21 Apr 2014 11:09:00 GMT

Need to configure x440 to listen/create dynamic vlans from core switch (dell)

RE: how to enable gvrp? missing command gvrp

Ron_Huygens — Fri, 25 Apr 2014 11:51:00 GMT

Gene,

GVRP is not supported in EXOS.

Regards

Ron

RE: how to enable gvrp? missing command gvrp

Magafox — Fri, 25 Apr 2014 11:51:00 GMT

Is GVRP on the road map to be included in EXOS at any point ?
Regards
Terry

RE: how to enable gvrp? missing command gvrp

Mrxlazuardin — Sun, 30 Nov 2014 18:56:00 GMT

Any update of GVRP features? This feature is very helpful on other products.

RE: how to enable gvrp? missing command gvrp

Gene_Fontanilla — Sun, 30 Nov 2014 18:56:00 GMT

i think GVRP is replaced by MVR on EXOS

RE: how to enable gvrp? missing command gvrp

PARTHIBAN_CHINN — Fri, 23 Jan 2015 13:46:00 GMT

Hello Gene,

GVRP is a GARP application that provides 802.1Q-compliant VLAN pruning and dynamic VLAN creation on 802.1Q trunk ports.With GVRP, the switch can exchange VLAN configuration information with other GVRP switches, prune unnecessary broadcast and unknown unicast traffic, and dynamically create and manage VLANs on switches that are connected through 802.1Q trunk ports.

In EXOS:You must be in 15.3.2

Multiple Registration Protocol/Multiple VLAN Registration Protocol is used for dynamically creating

VLANs and/or dynamically adding ports to VLANs. As per IEEE Std 802.1Q-2011, some VLANs can be

marked as forbidden VLANs on some ports so that when MVRP PDU is received on the port with the

particular forbidden VLAN Id, the VLAN is not created and if the VLAN is already there, the port is not

added to the VLAN.

The VLAN registration is of three types:

• Forbidden—Port is forbidden to be added to the VLAN

• Normal—Port is allowed to be added to the VLAN

• Fixed—Port is statically added to the VLAN

RE: how to enable gvrp? missing command gvrp

Gene_Fontanilla — Fri, 23 Jan 2015 13:46:00 GMT

Hi Parthiban! thanks for the reply, we decided to replace the dell switch with a new x670v switch, making it easier to use MVR

RE: how to enable gvrp? missing command gvrp

Mrxlazuardin — Thu, 02 Apr 2015 19:20:00 GMT

Hi Parthiban,

How about compatibility between GVRP capable switch with MVR on EXOS? Our existing devices are not MVR capable.

Best regards,