topic Adding a second PSU 10931 module on X460 in ExtremeSwitching (EXOS/Switch Engine)

Adding a second PSU 10931 module on X460

AIT_Support — Tue, 30 May 2017 13:52:00 GMT

Dear Community
If I want to add a second internal power supply to a Summit X460, should I first switch off the switch, or can you connect the PSU 10931 module "hot"?
Is there any configuration ?
regards
Eva

RE: Adding a second PSU 10931 module on X460

Naresh — Tue, 30 May 2017 14:08:00 GMT

Hi,

PSU is hot swappable. You can directly connect to the PSU to the switch and there is no configuration to be done on the switch.

RE: Adding a second PSU 10931 module on X460

Tripathy__Priya — Fri, 02 Jun 2017 09:43:00 GMT

I could see my colleague Naresh has already answered for your queries here. But to add more to this in case if you want to know the PSUs which are all compatible with X460G2 hardware then before adding them to the device better to cross verify this link below to find out the compatible PSUs for the same hardware in the future:

https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-PSUs-are-compatible-with-the-Summit-X46...

Let us know if you have any further queries to address here......