topic RE: Info:pim.vsm.UnkIPNetAddr what does this actually means in ExtremeSwitching (EXOS/Switch Engine)

Info:pim.vsm.UnkIPNetAddr what does this actually means

Rod_Robertson2 — Tue, 17 Mar 2015 21:41:00 GMT

What does this alarm from the log actually tell me..

Searching the web :
Description
This event occurs when an MLAG node receives a checkpoint message from the peer with ingress

VLAN IP address information that does not match any of the MLAG VLANs configured on the local

node.

Remedy

Ensure that MLAG VLANs are configured with correct IP addresses and mask length on MLAG

peer nodes. If the IP addresses do not match for MLAG VLANs then PIM may not function as

expected.

Though personally I do not agree with the MLAG configuration issue as this has been working and not changed for months..

RE: Info:pim.vsm.UnkIPNetAddr what does this actually means

Annas_Shaker — Wed, 18 Mar 2015 03:19:00 GMT

Rod, How often is this message showing up in the log?

RE: Info:pim.vsm.UnkIPNetAddr what does this actually means

Annas_Shaker — Wed, 18 Mar 2015 03:22:00 GMT

Also, are you seeing this message on a switch where MLAG is configured?

RE: Info:pim.vsm.UnkIPNetAddr what does this actually means

PARTHIBAN_CHINN — Wed, 18 Mar 2015 12:20:00 GMT

I would like to see the entire logs Also what exos version are you running 15.3.1.4 latest patch for mlag . Many customer run this exos with no issues.