topic X870 QSFP informations can not be read in ExtremeSwitching (EXOS/Switch Engine)

X870 QSFP informations can not be read

Alexander_Bauer — Wed, 25 Apr 2018 12:02:00 GMT

Hello, i have a Problem with a QSFP+ 40G SR4 in a X870 Switch. At Port 9 i can read all the information about the QSFP. But at Port 13 shows me the Switch that the QSFP is not present.
Both Ports are Up with 40G Full Duplex and works fine.

Firmware is onie-22.4.1.4-patch1-2

Is there a Bug?

Thanks for your help.

RE: X870 QSFP informations can not be read

Nico_Willamowsk — Wed, 18 Jul 2018 11:46:00 GMT

Hello Alex,

i have the same Problem with Qsfp+100G in a 870 Switch. Port 25 Shows the Information, Port 29 Shows me QSFP is not present, but i have a Link and a show port no-refresh shows 100G. I have the same Firmware like you.

RE: X870 QSFP informations can not be read

Drew_C — Wed, 18 Jul 2018 18:23:00 GMT

This sounds like an issue to create a case for. That will make it easier for it to get routed to Engineering for investigation.
How to contact Extreme Networks Global Technical Assistance Center (GTAC)