https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33063#M6213 Create Date: Jun 17 2013 10:42PM<BR /> <BR /> Probably an RMA is needed. But TAC need to be consulted first. Contact them. (from ethernet) Wed, 08 Jan 2014 06:03:00 GMT EtherNation_Use 2014-01-08T06:03:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33062#M6212 Create Date: Jun 11 2013 4:53PM<BR /> <BR /> I had a problem with PoE in the Switch summit X460-48p, the port not delivering PoE, The diagnosis is as follows <BR /> <BR /> Test XGM3 Module : Not detected, skipping test<BR /> - Please do not insert during diagnostics<BR /> Test Stacking Module : Not detected, skipping test<BR /> - Please do not insert during diagnostics<BR /> Test i2cenviron - PASS<BR /> Test fantray - PASS<BR /> Test nvram - PASS<BR /> Test internal compact flash - PASS<BR /> Test sdram - PASS<BR /> Test loopback eth - PASS<BR /> Test loopback pci - PASS<BR /> Test loopback mac interface - PASS<BR /> Test loopback phy copper - PASS<BR /> Test loopback phy fiber - PASS<BR /> Test snake interface - PASS<BR /> Test asic0 reg - PASS<BR /> Test asic0 mac - PASS<BR /> Test asic1 reg - PASS<BR /> Test asic1 mac - PASS<BR /> <B>Test PoE - FAIL</B><BR /> <BR /> Storing diagnostics result into EEPROM.<BR /> Diagnostics completed.<BR /> <BR /> Last Test Date: Jun-11-2013 POE check state loop test failed<BR /> <BR /> Last Test Version: 5.10<BR /> <BR /> Summary: Diagnostics Fail<BR /> <BR /> <BR /> <BR /> RMA is Recommended for this problem ???<BR /> <BR /> <BR /> <BR /> the Switch already has the latest version..<BR /> <BR /> (from AlfonsoFM) Wed, 08 Jan 2014 06:03:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33062#M6212 EtherNation_Use 2014-01-08T06:03:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33063#M6213 Create Date: Jun 17 2013 10:42PM<BR /> <BR /> Probably an RMA is needed. But TAC need to be consulted first. Contact them. (from ethernet) Wed, 08 Jan 2014 06:03:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33063#M6213 EtherNation_Use 2014-01-08T06:03:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33064#M6214 Run into the same issues before, Called TAC and RMA the switch. Tue, 01 Apr 2014 18:36:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/error-poe-in-summit-x460-48p/m-p/33064#M6214 Mike28 2014-04-01T18:36:00Z