topic RE: UPM Scripting on Summit X150 in ExtremeSwitching (EXOS/Switch Engine)

UPM Scripting on Summit X150

Hunter_Blackwol — Wed, 16 Sep 2015 22:13:00 GMT

I'm working on implementing a PoE schedule in our organization and we settled on using UPM scripts. I came across two buildings that have Summit X150 series switches and they don't seem to support UPM scripting. I just wanted to confirm that there was no way to add this functionality with newer firmware or an additional module. If not are there any alternatives short of swapping them out?

RE: UPM Scripting on Summit X150

BrandonC — Wed, 16 Sep 2015 22:19:00 GMT

Hi Hunter,

Unfortunately, the X150 does not support UPM scripting, as it has an L2-Edge license, and UPM scripting requires at least an Edge license.

-Brandon

RE: UPM Scripting on Summit X150

Hunter_Blackwol — Wed, 16 Sep 2015 22:20:00 GMT

I understand. Thank you for the quick answer! 

RE: UPM Scripting on Summit X150

BrandonC — Wed, 16 Sep 2015 23:35:00 GMT

For anyone who comes across this in the future, this information is included in a GTAC Knowledge article as well.

-Brandon