topic RE: Problem with CPU and memory monitoring (MIBs) in ExtremeSwitching (EXOS/Switch Engine)

Problem with CPU and memory monitoring (MIBs)

eyeV — Wed, 04 Jun 2014 09:20:00 GMT

Hi everybody.
I have some troubles with CPU and memory monitoring on the Solarwinds monitoring system. I've gotten interface statistics, sysname, sysdescription, but I haven't found CPU and memory information.

Then I try to find ExtremeXOS MIBs, but unfortunately I haven't found it too.

Where can I find XOS MIBs? Can you give me advice about SNMP monitoring?

RE: Problem with CPU and memory monitoring (MIBs)

Paul_Russo — Wed, 04 Jun 2014 17:10:00 GMT

Hello EyeV the MIBS for XOS are on the esupport support site. If you can't login then call TAC at 18009982408. P

RE: Problem with CPU and memory monitoring (MIBs)

Sumit_Tokle — Wed, 04 Jun 2014 23:59:00 GMT

Few useful SNMP OID,

Name extremeCpuMonitorTotalUtilization

OID .1.3.6.1.4.1.1916.1.32.1.2

Name extremeCpuMonitorMaxUtilization

OID .1.3.6.1.4.1.1916.1.32.1.3.1.12

Name: extremeCpuMonitorCurrentUtilization

OID .1.3.6.1.4.1.1916.1.32.1.6.0

Name: extremeSwMonitorCpuUtilization

OID: .1.3.6.1.4.1.1916.1.32.3.0.1

Name: extremeMemoryMonitorSystemTable

OID: .1.3.6.1.4.1.1916.1.32.2.2

Name extremeMemoryMonitorSystemFree

OID: .1.3.6.1.4.1.1916.1.32.2.2.1.3

Name: extremeMemoryMonitorSystemUsage

OID: .1.3.6.1.4.1.1916.1.32.2.2.1.4

Name: extremeMemoryMonitorUserUsage

OID: .1.3.6.1.4.1.1916.1.32.2.2.1.5

Name: memoryTotal

OID: .1.3.6.1.4.1.3375.1.1.78.0

Name: memoryUsed

OID: .1.3.6.1.4.1.3375.1.1.77.0

Name: extremeMemoryMonitorSystemUsage

OID: .1.3.6.1.4.1.1916.1.32.2.2.1.4

RE: Problem with CPU and memory monitoring (MIBs)

Josue_Garcia — Wed, 04 Jun 2014 23:59:00 GMT

Hi Summit,

The values that you post are applicable for BD8810 ? could you provide details of how to achieve the following:

Need the oid values for BD8810 to monitor on Cacti: Current CPU Utilization per MSM, Memory Utilization (System, User, Free) per MSM, System Storage (Used and Free), and per VLAN L3 Utilization.

However, If is necessary I can open a case.

RE: Problem with CPU and memory monitoring (MIBs)

eyeV — Thu, 05 Jun 2014 09:14:00 GMT

Thank you Paul and thank you Sumit. I use SNMP-walk and I don't find any 1.3.6.1.4.1.1916.1.32.1 or 1.3.6.1.4.1.1916.1.32.3 OIDs. My list begins from .1.3.6.1.4.1.1916.1.32.2.2.1.3.1.

Should I change something on the switch or my configuration is enough.

configure snmp sysName "xxx"
configure snmp sysLocation "xxx"
configure snmp sysContact "xxx"
# Module snmpMaster configuration.
configure snmpv3 add community $MyRWCommunity$ name $MyName$ user v1v2c_rw
configure snmpv3 add community $MyROCommunity$ name $MyName$ user v1v2c_ro
configure snmpv3 add target-addr v1v2cNotifyTAddr1 param v1v2cNotifyParam1 ipaddress 172.30.0.6 transport-port 162 tag-list defaultNotify
configure snmpv3 add target-params v1v2cNotifyParam1 user v1v2cNotifyUser1 mp-model snmpv2c sec-model snmpv2c sec-level noauth
disable snmpv3 default-group
disable snmpv3 default-user
configure snmp access-profile mgmt-acl readwrite

entry ManagementACL {
if match any {
source-address 172.30.0.0/16;
source-address 172.20.0.0/16;
source-address 192.168.0.0/23;
} then {
permit;
}
}

P.S. Thank you so much. You really help me.

RE: Problem with CPU and memory monitoring (MIBs)

eyeV — Thu, 05 Jun 2014 17:01:00 GMT

Sorry, I've found it.

RE: Problem with CPU and memory monitoring (MIBs)

Sumit_Tokle — Thu, 05 Jun 2014 19:50:00 GMT

Can you let us know what information you found?

RE: Problem with CPU and memory monitoring (MIBs)

eyeV — Fri, 06 Jun 2014 09:12:00 GMT

I've found OIDs in my snmpwalk list. Anyway OID .1.3.6.1.4.1.1916.1.32.1.6.0 doesn't work, but other OIDs from your list works perfectly.

RE: Problem with CPU and memory monitoring (MIBs)

Davor — Wed, 03 Dec 2014 19:31:00 GMT

We have issue with pooling system info (cpu, mem etc.) from X8 with Solarwinds. I also tryed to pull with Paessler and some other snmp tools. some of those OIDS are correct but some do not show usable info.
I have also troubles importing Extreme Networks MIB file to lot of SNMP tools. What is deal with that. What MIB/OID tool you use that can import Extremes MIB file correctly?

What OID's to use on X8?

RE: Problem with CPU and memory monitoring (MIBs)

treese — Thu, 14 May 2015 20:39:00 GMT

Is there a config or concept guide on this one. I have summit switches and 8810's that need I want more viability using Solarwinds.

RE: Problem with CPU and memory monitoring (MIBs)

Drew_C — Thu, 14 May 2015 20:39:00 GMT

I'm not very familiar with the ins and outs of Solarwinds... Can you import the EXOS MIB into the program to help make configuration easier?

RE: Problem with CPU and memory monitoring (MIBs)

treese — Thu, 14 May 2015 20:39:00 GMT

I believe so. They have a basic set but always seems like something is missing.

Is there a config guide or document for all the Extreme snmp OID's?

RE: Problem with CPU and memory monitoring (MIBs)

Drew_C — Thu, 14 May 2015 20:39:00 GMT

The MIB file is somewhat tied to each EXOS version. If you have access to esupport/extranet, you should be able to download it for your particular version. If you can't find it, let me know what version your EXOS gear is running and I can get it to you.
Once it's imported, you should be able to browse and search for specific areas of interest.
I'm not aware of a specific SNMP guide, though one may exist - sorry.

RE: Problem with CPU and memory monitoring (MIBs)

treese — Thu, 14 May 2015 20:39:00 GMT

Ok Thank you.