topic RE: how can i connect my VM to securecrt or putty ? in ExtremeSwitching (EXOS/Switch Engine)

how can i connect my VM to securecrt or putty ?

Ala_Eddine_Chhi — Thu, 21 Jul 2016 17:56:00 GMT

Hi,

I want to connect my VM through securecrt or putty but i didn't get a direct way.could you help me please ?

thanks

RE: how can i connect my VM to securecrt or putty ?

Zsolt — Thu, 21 Jul 2016 20:22:00 GMT

Hi,

What program are you using to emulate EXOS?

For example, if you are using VirtualBox you need IP connectivity between your PC and the VM. Then you can connect directly from your PC terminal.

Best Regards,
Zsolt

RE: how can i connect my VM to securecrt or putty ?

Ala_Eddine_Chhi — Thu, 21 Jul 2016 20:22:00 GMT

but i want to know how to establish the connection between my PC and the VM ?

RE: how can i connect my VM to securecrt or putty ?

Matthew_Helm1 — Thu, 21 Jul 2016 20:22:00 GMT

What hypervisor are you using?

RE: how can i connect my VM to securecrt or putty ?

Ala_Eddine_Chhi — Thu, 21 Jul 2016 20:22:00 GMT

i am using virtual box

RE: how can i connect my VM to securecrt or putty ?

Gareth_Mitchell — Thu, 21 Jul 2016 20:22:00 GMT

Hi

What protocol are you using, ssh/telnet, are they enabled on the switch?

Can you ping the EXOS VM from the client PC?

-Gareth

RE: how can i connect my VM to securecrt or putty ?

Ala_Eddine_Chhi — Thu, 21 Jul 2016 20:22:00 GMT

yes i enabled telnet i set adapter to Wifi, assign port 1 and an ip adress to default vlan and it didn't work

RE: how can i connect my VM to securecrt or putty ?

Gareth_Mitchell — Thu, 21 Jul 2016 20:22:00 GMT

Did you set the adapters in vbox to allow promiscous?

RE: how can i connect my VM to securecrt or putty ?

Ala_Eddine_Chhi — Thu, 21 Jul 2016 20:22:00 GMT

yes i used the installation guide

RE: how can i connect my VM to securecrt or putty ?

Gareth_Mitchell — Thu, 21 Jul 2016 20:22:00 GMT

Can you share your EXOS config and a screenshot of your vbox nic config?

RE: how can i connect my VM to securecrt or putty ?

Stephane_Grosj1 — Thu, 21 Jul 2016 20:22:00 GMT

if you're using VirtualBox, I would recommend you to set Adapter 1 as "Host-only adapter" and use "VirtualBox Host-Only Ethernet Adapter". Choose adapter type as "Intel PRO/1000 MT Desktop".

You need to have in VirtualBox, in File > Preferences > Network a Host-only Network defined.

Set the IP address of the Mgmt vlan in that network as well, and you should be able to telnet/ssh/scp... from any tool on your laptop.

RE: how can i connect my VM to securecrt or putty ?

Matthew_Helm1 — Fri, 22 Jul 2016 22:08:00 GMT

Please see this: https://www.dropbox.com/sh/uzgea2twufmnn6x/AADTXbeG-H_wEHpjOMFmmehNa?dl=0

RE: how can i connect my VM to securecrt or putty ?

Matthew_Helm1 — Fri, 22 Jul 2016 22:28:00 GMT

Hope this helps.