topic XOS stacking commands not visible in "show config" in ExtremeSwitching (EXOS/Switch Engine)

XOS stacking commands not visible in "show config"

M_Nees — Fri, 13 Mar 2015 22:53:00 GMT

During the last weeks i configure several X440 and X670 stacks with XOS V15.6.2.x. After setting up the stack with the needed commands all works fine. Then i want to see these entered commands in the "show config" or "show config all" output - but they are not visible there.

Does a command exists which makes the internal stack config visibile ?

RE: XOS stacking commands not visible in "show config"

Bill_Stritzinge — Fri, 13 Mar 2015 22:57:00 GMT

Matthias,

No, the stacking configuration is stored in the NVRAM of the switch, therefore you do not see any stacking related commands in the configuration file. There are specific stack commands like "show stacking" , etc - you can also see the stats on the stacking ports - "show ports stacking-ports stat"

Bill

RE: XOS stacking commands not visible in "show config"

Alexandr_P — Fri, 13 Mar 2015 23:32:00 GMT

Also show stacking detail

RE: XOS stacking commands not visible in "show config"

Patrick_Voss — Wed, 06 May 2015 22:50:00 GMT

"show stacking configuration" as well