https://community.extremenetworks.com/t5/extremeswitching-exos-switch/change-gateway-for-1-host-on-remote-subnet/m-p/34267#M6687 Create Date: Jul 2 2012 9:50AM<BR /> <BR /> I have 1 main site 1 remote site. All traffic is coming back to x450 core at main site. At the main site I have 2 internet gateways. gateway 1 99% of users use for internet access, GW 2 is a smaller netgate FW. The remote site is connected via t1 leased line. Looking for guidance on how to configure a single pc at remote site to connect to GW2 at main site. I think flow-redirect command might do it , but not sure. Thank you for your time (from David_Kordyban) Wed, 08 Jan 2014 05:54:00 GMT EtherNation_Use 2014-01-08T05:54:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/change-gateway-for-1-host-on-remote-subnet/m-p/34267#M6687 Create Date: Jul 2 2012 9:50AM<BR /> <BR /> I have 1 main site 1 remote site. All traffic is coming back to x450 core at main site. At the main site I have 2 internet gateways. gateway 1 99% of users use for internet access, GW 2 is a smaller netgate FW. The remote site is connected via t1 leased line. Looking for guidance on how to configure a single pc at remote site to connect to GW2 at main site. I think flow-redirect command might do it , but not sure. Thank you for your time (from David_Kordyban) Wed, 08 Jan 2014 05:54:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/change-gateway-for-1-host-on-remote-subnet/m-p/34267#M6687 EtherNation_Use 2014-01-08T05:54:00Z