topic RE: X430 IP address on default VLAN in ExtremeSwitching (EXOS/Switch Engine)

X430 IP address on default VLAN

David_L__Church — Tue, 24 Apr 2018 23:13:00 GMT

I'm trying to put a new x430 switch on the network with IP 192.168.129.126

I set it up with the following commands

disable dhcp vlan Default
configure vlan Default add ports 7-10 untagged
configure vlan Default ipaddress 192.168.129.126/24
configure iproute add Default 192.168.129.2

The problem is that I can't see that IP on my network. I'm plugged into port 8.

The switch this one is plugged into is Enterasys C-Series port 21 which is also configured vlan default untagged.

I can't ping 192.168.129.126. I can't connect http. I feel like I'm just going in circles.

RE: X430 IP address on default VLAN

Robert_Cummins — Tue, 24 Apr 2018 23:23:00 GMT

How are you trying to use this switch? Is it a L2 or L3 device? What does the fdb show? What does iparp show?

RE: X430 IP address on default VLAN

David_L__Church — Fri, 27 Apr 2018 00:29:00 GMT

Update: I was trying to resolve another switch on the network and determined the port I was plugged into was blocked for the Default VLAN. This was my problem