topic RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS in ExtremeSwitching (EXOS/Switch Engine)

Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Thu, 18 Aug 2016 19:27:00 GMT

Access list

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Patrick_Voss — Thu, 18 Aug 2016 19:30:00 GMT

Here is an article that explains how to create and apply an ACL:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-and-apply-an-ACL-in-EXOS

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Paul_Russo — Thu, 18 Aug 2016 19:33:00 GMT

Hello Sivyile

In XoS there are dynamic ACLs that you can execute on the cli and are usually in used until the switch is rebooted. A permanent ACL is done using a policy file. This file can be created using the CLI using the built in VI editor.

I am assuming you need the permanent version. What I would recommend is to create the file using notepad on the computer and then transferring it to the switch using FTP or the newer web management of the switch (21.x)

The best way to do this initially is to go into the concepts guide and copy the example that is in there and paste it to notepad then manipulate it.

If there is something specific you need to do with the ACL let us know and we can create it for you but need the data

Thanks
P

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Henrique — Thu, 18 Aug 2016 19:38:00 GMT

Hi Sivuyile, please see the Articles below:

How to create and apply an ACL in EXOS

Another option (CLI instead of Policy file) is using Dynamic ACL. You can see an example in the User Guide in the link below:

http://documentation.extremenetworks.com/exos/exos_21_1/acl/t_create-the-dynamic-acl-rule.shtml

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Thu, 18 Aug 2016 19:53:00 GMT

Thanks Guys let me look on the link and see what i'm gone come up with ,

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Christina_Brunk — Thu, 18 Aug 2016 20:53:00 GMT

Here's our ACL Solutions Guide. It is a bit outdated but may provide the information you are looking for...http://documentation.extremenetworks.com/PDFs/EXOS/ACL_Solutions_Guide.pdf

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 18:01:00 GMT

Hi

My problem now on VI I am unable to save my access list and go back to command line i have try to use :w for save and :wq to write and quit it seems both commands are not working can some please help me ...

I'm not too sure if i'm allowed to past what i was doing here ?

Thnaks

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

StephenW — Fri, 19 Aug 2016 18:06:00 GMT

Have you exited insert mode? If there is a capital "I" in the bottom left your in insert mode.
Press:

esc
:
wq
enter

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 18:06:00 GMT

Hi Stephen

I have tryed esc to escape is not working i tryed :q! is not work and :wq
small and capital letter it keep on going down

to escape i have switch off the switch or take out the console

can i please show you my running command ?

Thanks

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

StephenW — Fri, 19 Aug 2016 18:06:00 GMT

Sure, What version of EXOS are you running. I like Paul's idea with 21.1 with the new web editor.

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Henrique — Fri, 19 Aug 2016 18:06:00 GMT

If you are able to exit from "insert mode", you can try some alternatives as follows:

esc
:x
enter

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 18:06:00 GMT

Thanks ZZ works

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Henrique — Fri, 19 Aug 2016 18:06:00 GMT

Great! 🙂

Maybe ":" is not being recognized for some reason.

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 18:06:00 GMT

thanks i can go back to the command line now when i type ZZ , but now my configure look like has not been saved

when i want to use my file its not found

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 19:02:00 GMT

Core-Switch.30 # show version

Image : ExtremeXOS version 21.1.1.4 21.1.1.4-patch1-2 by release-manager on Fri Apr 15 12:41:44 EDT 2016
BootROM : 1.0.1.7
Diagnostics : 5.3

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 19:09:00 GMT

Please see results

Core-Switch.31 # vi packetcounter.pol
entry packecounter {
if match all {
source-address 192.168.31.122/32;
destination-address 192.168.32.41./32;
} then {
count test ;
permit ;
}
}
:w
:wq
:q!

~

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Siva2 — Fri, 19 Aug 2016 19:09:00 GMT

When I use the :wq or :q! and press enter it take me to the next line

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Patrick_Voss — Fri, 19 Aug 2016 19:09:00 GMT

When you get into VI you have to press "i" to type. After the entry is finished press escape. This should put the cursor at the bottom blinking. Type in :wq then enter.

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

StephenW — Fri, 19 Aug 2016 19:09:00 GMT

I think your not getting out of insert mode. make sure the "I" changed to a "-" before you do :wq

RE: Can anyone please assist me with access list , show me how to create access list using cli command on EXOS

Henrique — Fri, 19 Aug 2016 19:09:00 GMT

Try to press "esc" many times and then ":wq".

Are you using console or telnet access? I'm wondering if that could be something with terminal emulator. If you are using console access, try via telnet.