https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36906#M7710 I need an OID to monitoring via SNMP different BDXA-10G48T modules on the same switch. Any help? Sat, 11 Mar 2017 03:33:00 GMT Francisco_Rodri 2017-03-11T03:33:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36906#M7710 I need an OID to monitoring via SNMP different BDXA-10G48T modules on the same switch. Any help? Sat, 11 Mar 2017 03:33:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36906#M7710 Francisco_Rodri 2017-03-11T03:33:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36907#M7711 Hello Francisco,<BR /> Did you receive an answer to your question from another source yet? What specifically do you want to monitor on these modules?<BR /> Thu, 01 Jun 2017 20:09:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36907#M7711 Drew_C 2017-06-01T20:09:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36908#M7712 Hi Drew...<BR /> <BR /> We can currently monitor the temperature of a sw, but we had a fault due to a module in specific BDXA-10G48T, whose temperature range was very high and different from that reported by SW and caused malfunction. The question is whether there is a MIB that specifically reports this value to my monitoring tool?<BR /> <BR /> regards Thu, 01 Jun 2017 20:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/bdxa-temp-monitoring/m-p/36908#M7712 Francisco_Rodri 2017-06-01T20:55:00Z