https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/36999#M7743 could anyone help in configuring IPv4 and IPv6 Dual stacking in Extreme Black daimond X8 Mon, 27 Oct 2014 23:31:00 GMT santhosh_kumar 2014-10-27T23:31:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/36999#M7743 could anyone help in configuring IPv4 and IPv6 Dual stacking in Extreme Black daimond X8 Mon, 27 Oct 2014 23:31:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/36999#M7743 santhosh_kumar 2014-10-27T23:31:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37000#M7744 IPV4 to IPv6 dual stacking is enabled by default.<BR /> No additional config is required.<BR /> ipv4 and ipv6 address can eb configured on a vlan interface.<BR /> Please let me know if you need more info Tue, 28 Oct 2014 14:06:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37000#M7744 PARTHIBAN_CHINN 2014-10-28T14:06:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37001#M7745 but can you please tell me how to enable communication for the both Sat, 01 Nov 2014 17:33:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37001#M7745 santhosh_kumar 2014-11-01T17:33:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37002#M7746 Hey there is configuration example in concepts guide.Page 1304.<BR /> The ExtremeXOS software supports the use of IPv6-in-IPv4 tunnels (known as configured tunnels or6in4 tunnels) and IPv6-to-IPv4 tunnels (known as 6to4 tunnels). Both types of tunnels are used to<BR /> connect regions of IPv6 routing across a region of IPv4 routing. From the perspective of the router, the<BR /> tunnel across the IPv4 region is one hop, even if multiple IPv4 routers are traversed during transport.<BR /> A 6in4 tunnel connects one IPv6 region to one other IPv6 region.<BR /> Multiple 6in4 tunnels can be configured on a single router to connect with multiple IPv6 regions.<BR /> Dynamic and static routing can be configured across a 6in4 tunnel. Hosts in the IPv6 regions need not<BR /> know anything about the configured tunnel, since packets destined for remote regions are sent over<BR /> the tunnel like any other type of routing interface.<BR /> A 6to4 tunnel connects one IPv6 region with multiple IPv6 regions. Only one 6to4 tunnel can be<BR /> configured on a single router.<BR /> <BR /> Fri, 07 Nov 2014 17:16:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37002#M7746 PARTHIBAN_CHINN 2014-11-07T17:16:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37003#M7747 Concepts guide 15.6 page 1329 has two examples with commands and topology<BR /> <BR /> Fri, 07 Nov 2014 17:19:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/how-to-configure-dual-stacking-of-ipv4-and-ipv6-in-extreme-black/m-p/37003#M7747 PARTHIBAN_CHINN 2014-11-07T17:19:00Z