topic RE: Disable the asterisk (*) and command counter in ExtremeSwitching (EXOS/Switch Engine)

Disable the asterisk (*) and command counter

eyeV — Mon, 30 Jun 2014 17:39:00 GMT

Hi everybody!

Can I disable the asterisk symbol before command prompt? And can I disable the command counter in this prompt?

We'd like to automate some things with SecureCRT and we have troubles with "WaitForString" operator.

RE: Disable the asterisk (*) and command counter

Jason_Parker — Mon, 30 Jun 2014 17:41:00 GMT

The * is for a configuration change
just do a save config
It even notes it if you type a command that is already active

RE: Disable the asterisk (*) and command counter

Jason_Parker — Mon, 30 Jun 2014 17:42:00 GMT

Sorry,
The command counter is default and cannot be changed from what I have understood

RE: Disable the asterisk (*) and command counter

eyeV — Mon, 30 Jun 2014 17:44:00 GMT

Thank you.

RE: Disable the asterisk (*) and command counter

Jason_Parker — Mon, 30 Jun 2014 17:52:00 GMT

I just ran the following script after selecting "start recording script" and pasting in the following commands

configure snmp sysContact "Jason-Parker"
configure sys-health-check all level strict
configure sys-recovery-level switch reset
configure snmp sysName "Extreme-x150"
configure snmp sysLocation "Jason's-Lab"

Screen capture

* Extreme-x150.5 # configure snmp sysContact "Jason-Parker"
* Extreme-x150.5 # configure sys-health-check all level strict
* Extreme-x150.6 # configure sys-recovery-level switch reset
* Extreme-x150.7 # configure snmp sysName "Extreme-x150"
* Extreme-x150.8 # configure snmp sysLocation "Jason's-Lab"

Let us know if you need any help
Thanks
Jason Parker