problems with ip route default

Mustafa — Wed, 06 Sep 2017 14:58:00 GMT

Hello. I have a route table. All routes are directed to 10.106.0.1 as the default route, but I would like to route a single VLAN to another route.
Could you please tell me about the things I need to do about the subject? Thank you.

Ori Destination Gateway Mtr Flags VLAN Duration
#s Default Route 10.106.0.1 1 UG---S-um--f- vlan500 82d:15h:
39m:46s
#d 10.106.0.0/24 10.106.0.254 1 U------um--f- vlan500 82d:15h:
39m:48s
#d 10.106.1.0/24 10.106.1.1 1 U------um--f- vlan10 82d:15h:
39m:48s
#d 10.106.2.0/24 10.106.2.1 1 U------um--f- vlan20 82d:15h:
39m:49s
#d 10.106.3.0/24 10.106.3.1 1 U------um--f- vlan30 82d:15h:
39m:49s

RE: problems with ip route default

Jarek — Wed, 06 Sep 2017 15:16:00 GMT

Hi,

all depends what switches you have and what you need to do.

For example you can use VR (Virtual Router) https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-a-Virtual-Router,
or you can use flow-redirect https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-flow-redirect/?q=flow+red...
and so on...

--
Jarek

topic problems with ip route default in ExtremeSwitching (EXOS/Switch Engine)

problems with ip route default

RE: problems with ip route default