https://community.extremenetworks.com/t5/extremeswitching-exos-switch/converting-3com-port-config-to-exos-config/m-p/37679#M7998 wondering if you can help<BR /> i have a config for a port of a 3com switch that i need to convert into a port config for XOS switch x460 and i am not sure of the command syntax can you assist<BR /> <BR /> interface<BR /> Ethernet1/0/2 <BR /> <BR /> stp edged-port enable<BR /> <BR /> broadcast-suppression pps 3000<BR /> <BR /> undo jumboframe enable<BR /> <BR /> MAC-authentication Note: This conversation was created from a <A href="http://community.extremenetworks.com/extreme/topics/setting-up-ntp-in-xos/replies/15024698" target="_blank" rel="nofollow noreferrer noopener">reply</A> on: <A href="http://community.extremenetworks.com/extreme/topics/setting-up-ntp-in-xos" target="_blank" rel="nofollow noreferrer noopener">Setting up NTP in XOS</A>. Tue, 18 Nov 2014 16:20:00 GMT shakil_khan 2014-11-18T16:20:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/converting-3com-port-config-to-exos-config/m-p/37679#M7998 wondering if you can help<BR /> i have a config for a port of a 3com switch that i need to convert into a port config for XOS switch x460 and i am not sure of the command syntax can you assist<BR /> <BR /> interface<BR /> Ethernet1/0/2 <BR /> <BR /> stp edged-port enable<BR /> <BR /> broadcast-suppression pps 3000<BR /> <BR /> undo jumboframe enable<BR /> <BR /> MAC-authentication Note: This conversation was created from a <A href="http://community.extremenetworks.com/extreme/topics/setting-up-ntp-in-xos/replies/15024698" target="_blank" rel="nofollow noreferrer noopener">reply</A> on: <A href="http://community.extremenetworks.com/extreme/topics/setting-up-ntp-in-xos" target="_blank" rel="nofollow noreferrer noopener">Setting up NTP in XOS</A>. Tue, 18 Nov 2014 16:20:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/converting-3com-port-config-to-exos-config/m-p/37679#M7998 shakil_khan 2014-11-18T16:20:00Z