topic Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted. in ExtremeSwitching (EXOS/Switch Engine)

Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Gene_Fontanilla — Mon, 14 Apr 2014 05:27:00 GMT

I need to change the vlan ID for our management for the stacked switch, but when i enter the command for the change, the "backup" wont accept the change, same with changing the vlan tag for the ports.

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Sumit_Tokle — Mon, 14 Apr 2014 05:47:00 GMT

Try to disable the vlan and then perform the same.

if still it is not working then provide "show config vlan", "show vlan" command output and session log which indicates the error while executing the command.

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Gene_Fontanilla — Mon, 14 Apr 2014 07:32:00 GMT

Error: Cannot configure VLAN Mgmt
Configuration failed on backup Node, command execution aborted!

this is the error i always get

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Sumit_Tokle — Mon, 14 Apr 2014 07:57:00 GMT

You can not change the tag value for mgmt vlan. mgmt vlan is for out of band access and present in virtual router vr-mgmt.

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Gene_Fontanilla — Mon, 14 Apr 2014 07:57:00 GMT

i want to create my own management vlan for my devices,

i created a new vlan for it 172.x.x.x and pinged the gateway 172.x.x.x but it wont ping, btw i already added the trunks and tags

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Sumit_Tokle — Mon, 14 Apr 2014 07:57:00 GMT

execute the command "show iparp <172.x.x.x >" or rtlookup 172.x.x.x and see if there is any output from these commands.

172.x.x.x should be the default gateway in above command.

RE: Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

Gene_Fontanilla — Mon, 14 Apr 2014 07:57:00 GMT

i think it wont ping because the sharing in the link between dell pc 6248 and summit x440 is not working properly,

is there a big difference between using dynamic and lacp for this link?