topic RE: NMS; Decrease update "Scanning" time in ExtremeSwitching (EXOS/Switch Engine)

NMS; Decrease update "Scanning" time

Yusuf_Kabbara — Wed, 07 Mar 2018 14:11:00 GMT

Hello,

Is there any way we can decrease the updating time of NMS, as it's takin a lot time to show the updates on network!

Regards
Yusuf

RE: NMS; Decrease update "Scanning" time

Ronald_Dvorak — Wed, 07 Mar 2018 15:30:00 GMT

Are we talking Extreme Mgmt Center (Netsight) ?
Could you please give one example of what exactly is slow so we'd get a better unterstanding of the issue.

-Ron

RE: NMS; Decrease update "Scanning" time

Yusuf_Kabbara — Wed, 07 Mar 2018 15:30:00 GMT

Kindly check the updates below!

RE: NMS; Decrease update "Scanning" time

Bharathiraja__S — Wed, 07 Mar 2018 15:33:00 GMT

Hi Yusuf,

Could you be more specfic on your requirement , if you have any screen short please share.

Thanks,
Suresh.B

RE: NMS; Decrease update "Scanning" time

Yusuf_Kabbara — Wed, 07 Mar 2018 15:33:00 GMT

Kindly check the updates below!

RE: NMS; Decrease update "Scanning" time

Yusuf_Kabbara — Wed, 07 Mar 2018 18:13:00 GMT

@Bharathiraja@Ronald

We are using NetSight to monitor our Extreme network ..

I tried to get a switch down, by closing the connection from previous switches "in ring" and it took 4 minutes to get the alarm on NetSight.

When I reconnected the switch back it took 4 minutes to come up on NetSight!

Even when I close a connection it's taking a lot of time to show!

So I was asking if there is a way to speed up the refresh time!

Thanks
Yusuf

RE: NMS; Decrease update "Scanning" time

Ronald_Dvorak — Wed, 07 Mar 2018 19:50:00 GMT

Hi Yusuf,

I never used it myself but AFAIK you'd set differnt poll groups here...

... and then set the poll group on the device....

Here the information from the help function....

-Ron

RE: NMS; Decrease update "Scanning" time

Yusuf_Kabbara — Wed, 07 Mar 2018 19:50:00 GMT

Thank You!

It's solved, but using different interfaces as I am using an older version!

Regards
Yusuf