topic RE: core switch configure stp in ExtremeSwitching (EXOS/Switch Engine)

core switch configure stp

greg_rayan — Mon, 27 Feb 2017 01:25:00 GMT

hello
i have a core swich extreme summit x450 and I would like to know how to configure the spanning tree
I believe that the priority must be at least What is the correct configuration?

thank you for your support

RE: core switch configure stp

Dave_Hammers — Mon, 27 Feb 2017 05:08:00 GMT

If you are running EXOS 21.x or later, have you seen https://github.com/extremenetworks/EXOS_Apps/tree/master/EZ_SpanningTree

RE: core switch configure stp

greg_rayan — Mon, 27 Feb 2017 05:31:00 GMT

hi dave
my version is 15.5.5.2
The article does not talk about core switch and priority
Because it seems to me that the configuration of spanning tree is different on a switch core network

RE: core switch configure stp

Ariyakudi_Srini — Mon, 27 Feb 2017 07:44:00 GMT

Hi Greg,

The below link gives you the basic idea of configuring RSTP in summit/BlackDiamond switches,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS

The below link is for the user guide to EXOS and sample configuration is available for your reference.

https://extrcdn.extremenetworks.com/wp-content/uploads/2014/01/EXOS_Concepts_Guide_15_4.pdf

As far as the priority goes, lower the numerical value of the priority, higher the precedence.