New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM

Marcel2 — Thu, 03 May 2018 18:13:00 GMT

I got 2 new New Summit x440-g2-24p-10ge4 Switches

1st one, when powered on the FAN 4 runs at a constant 15000RPMThe rest of the Fans, are quiet at 2100RPM, while nothing is plugged in.

Then the second one runs normally with normal fan speed but as soon as I plug one POE device into it the Temp goes up to 91C and fans refs up to over 4000 - 5000 RPM

Why will this happen?

show version
Switch : 800616-00-06 1622N-41425 Rev 06 BootROM: 1.0.1.7 IMG: 22.4.1.4
PSU-1 : Internal Power Supply Rev
PSU-2 :

Image : ExtremeXOS version 22.4.1.4 by release-manager
on Wed Dec 6 14:34:44 EST 2017
BootROM : 1.0.1.7
Diagnostics : 5.12
Certified Version : EXOS Linux 3.18.48, FIPS fips-ecp-2.0.16

Same for both Switches

Can anyone please help me with this.

RE: New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM

Drew_C — Thu, 03 May 2018 22:54:00 GMT

Hi Marcel,
I was talking about your issue with a colleague and we think it would be best if you can open a ticket with GTAC on this. If you do, please share the case number with me here.

-Drew

topic New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM in ExtremeSwitching (EXOS/Switch Engine)

New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM

RE: New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM