topic RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches in ExtremeSwitching (EXOS/Switch Engine)

Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

Kim_Pin_Ng1 — Thu, 16 Jan 2014 15:49:00 GMT

Hi, does anyone know how could I power up a bosch autodome 7000 which requires 30W on a X440-24p? I have tried connecting to it but the switch only delivers ~4-5W. Are there any config needed? Thanks

RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

Balaji — Tue, 21 Jan 2014 01:26:00 GMT

Hi Kim,

What is the operator-limit configured on the port ? How many POE devices are connected to this switch?

Please post the output of the below command

Show inline-power info detail port .

Thanks.

RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

Kim_Pin_Ng2 — Tue, 21 Jan 2014 05:31:00 GMT

It was left as default and there is only one POE camera connected to it.

RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

Mike_Lytle — Tue, 21 Jan 2014 23:43:00 GMT

Kim,

thank you for the question. It appears this particular camera may be on the edge of the maximum power we can deliver on a POE+ port (i.e. 30 Watt).

We would love to investigate this properly with our TAC team. I suggest that the customer opens an case through their normal support process.

best regards,

Mike Lytle