https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40351#M9093 Hi,<BR /> <BR /> We are getting the below error on our X670-V switch. Port 1:33 is a sharing port "1:33 and 1:34"<BR /> <BR /> Port=1:33: No associated STP port for STP Domain tag 1 (Rate-limited)<BR /> <BR /> If we look at STP I can see 1:33,<BR /> <BR /> 1:33* 802.1D FORWARDING 18000 eRppad---- 128 8021 20:00:00:11:5d??4c:01<BR /> <BR /> If I take a look at the STP configuration I don't see port 1:33, could this be my issue?<BR /> <BR /> enable stpd s0 ports 1:32<BR /> configure stpd s0 ports mode dot1d 1:35<BR /> configure stpd s0 ports cost auto 1:35<BR /> configure stpd s0 ports port-priority 128 1:35<BR /> configure stpd s0 ports link-type point-to-point 1:35<BR /> configure stpd s0 ports edge-safeguard disable 1:35<BR /> enable stpd s0 ports 1:35<BR /> configure stpd s0 ports mode dot1d 1:36<BR /> configure stpd s0 ports cost auto 1:36<BR /> configure stpd s0 ports port-priority 128 1:36<BR /> configure stpd s0 ports link-type point-to-point 1:36<BR /> configure stpd s0 ports edge-safeguard disable 1:36<BR /> <BR /> Thanks<BR /> Ian Worms <BR /> <BR /> Tue, 28 Oct 2014 17:52:00 GMT Ian_Worms 2014-10-28T17:52:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40351#M9093 Hi,<BR /> <BR /> We are getting the below error on our X670-V switch. Port 1:33 is a sharing port "1:33 and 1:34"<BR /> <BR /> Port=1:33: No associated STP port for STP Domain tag 1 (Rate-limited)<BR /> <BR /> If we look at STP I can see 1:33,<BR /> <BR /> 1:33* 802.1D FORWARDING 18000 eRppad---- 128 8021 20:00:00:11:5d??4c:01<BR /> <BR /> If I take a look at the STP configuration I don't see port 1:33, could this be my issue?<BR /> <BR /> enable stpd s0 ports 1:32<BR /> configure stpd s0 ports mode dot1d 1:35<BR /> configure stpd s0 ports cost auto 1:35<BR /> configure stpd s0 ports port-priority 128 1:35<BR /> configure stpd s0 ports link-type point-to-point 1:35<BR /> configure stpd s0 ports edge-safeguard disable 1:35<BR /> enable stpd s0 ports 1:35<BR /> configure stpd s0 ports mode dot1d 1:36<BR /> configure stpd s0 ports cost auto 1:36<BR /> configure stpd s0 ports port-priority 128 1:36<BR /> configure stpd s0 ports link-type point-to-point 1:36<BR /> configure stpd s0 ports edge-safeguard disable 1:36<BR /> <BR /> Thanks<BR /> Ian Worms <BR /> <BR /> Tue, 28 Oct 2014 17:52:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40351#M9093 Ian_Worms 2014-10-28T17:52:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40352#M9094 yes.that could be the reason.<BR /> Could you take packet capture to see if we are receiving BPDU?<BR /> Need to know how much bpdu's are recevied.<BR /> normal scenario it will not get rate limited Tue, 28 Oct 2014 18:03:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40352#M9094 PARTHIBAN_CHINN 2014-10-28T18:03:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40353#M9095 Hi,<BR /> <BR /> Will get one now, is this only rate limited to vlan 1 and what is the rate limit bandwidth?<BR /> <BR /> Ian <BR /> Tue, 28 Oct 2014 18:12:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/no-associated-stp-port-for-stp-domain-tag-1-rate-limited/m-p/40353#M9095 Ian_Worms 2014-10-28T18:12:00Z