topic RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working in ExtremeSwitching (EXOS/Switch Engine)

Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Arjumand_Qazi — Thu, 23 Feb 2017 16:04:00 GMT

Hello, Cisco 9970 IP phones are connected to X440 48p sumit switches, Problem is video cam will not work. but when the same phone is hooked to Cisco switch it will work. what config do we need to make on XOS that will support the video? we have LLDP config on all XOS devices but video still not working.. please assist..

RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Bastian_Sprotte — Thu, 23 Feb 2017 17:21:00 GMT

hello,
the Phone might require LLDP-MED options to understand that it can request more PoE power from the switch. So please try to enable the PoE MED options per LLDP.

configure lldp port 1:1 advertise system-description
configure lldp port 1:1 advertise system-capabilities
configure lldp ports 1:1 advertise vendor-specific med capabilities
configure lldp ports 1:1 advertise vendor-specific med power-via-mdi

regards
Bastian
-

RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Arjumand_Qazi — Thu, 23 Feb 2017 21:07:00 GMT

hello Bastian, thanks for the feedback I am missing on

configure lldp port 1:1 advertise system-description
configure lldp port 1:1 advertise system-capabilities

but the last 2 commands of lldp are are alreadt there, advert system-desc and advert system-capab commands will do any difference?

RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Arjumand_Qazi — Sun, 26 Feb 2017 20:33:00 GMT

Hello,

how can I manually set in-line power in X440..
the Cisco IP 99xx series is Class 4 PoE device that may require power up to 25w, can I manually set the power setting on the port itself ?