topic RE: two virtual routers for a trap receiver in ExtremeSwitching (EXOS/Switch Engine)

two virtual routers for a trap receiver

Ghost1081 — Sat, 28 Jan 2017 22:53:00 GMT

two virtual routers for a trap receiver

RE: two virtual routers for a trap receiver

Ghost1081 — Sat, 28 Jan 2017 23:10:00 GMT

Hello together,

i have this config on a working switch:

Destionation address: :
Source Adress: of the switch

now i would like to set the same config on another switch.
this command works for add the config like show above, but only with the virtual router VR-Default.
How get i two virtual routers into this config?

configure snmp add trapreceiver
community public
port
from
vr "VR-Default"

RE: two virtual routers for a trap receiver

Patrick_Voss — Sun, 29 Jan 2017 01:15:00 GMT

Hello Ghost108,

When I run that command on a lab switch it allows me to select the vr I created

# create vr vr-test
# configure snmp add trapreceiver 10.10.10.1 community public vr "vr-test"

Can you elaborate on your issue?

RE: two virtual routers for a trap receiver

Ghost1081 — Sun, 29 Jan 2017 01:16:00 GMT

yes this works.
but i would like to set VR-Default AND VR-Mgmt as vr
but i dont know how

short explanation:
i would like to set the same config like the screenshot shows

RE: two virtual routers for a trap receiver

Patrick_Voss — Sun, 29 Jan 2017 04:16:00 GMT

If you do not specify a vr it does both by default.

RE: two virtual routers for a trap receiver

Ghost1081 — Sun, 29 Jan 2017 15:43:00 GMT

this was to easy - but i works.
thx !

RE: two virtual routers for a trap receiver

Drew_C — Mon, 30 Jan 2017 21:36:00 GMT

Welcome to The Hub, Ghost!
It seems this conversation was marked "private" when it was created. Since there doesn't seem to be any private information here, I've changed it to "public."